-40%
(pack) Rod Sealing U-ring K30 NBR ID 10mm-50mm (choose dimensions)

(pack) Rod Sealing U-ring K30 NBR ID 10mm-50mm (choose dimensions)

$ 0.66

Availability: 6000 in stock
  • Refund will be given as: Money Back
  • Brand: Unbranded/Generic
  • Condition: New
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer

    Description

    K30 is a single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.
    PRODUCT ADVANTAGES
    • Superior wiping effect
    • Superior sealing effect
    • Wide range of dimensions
    • Able to work in hard conditions
    • Good adjustment to temperature changes due to the metal ring
    APPLICATION
    Pneumatic cylinders.
    MATERIAL
    CODE
    NBR
    70 SHORE A
    NB
    7001
    STEEL
    ST37
    FE
    9901
    OPERATING CONDITIONS
    MEDIA
    Prepared , dried and de-oiled compressed air
    TEMPERATURE
    -30°C +105°C
    PRESSURE
    ≤16 Bar
    SPEED
    ≤1.0 m/sn
    Note: The above data are maximum values and cannot be used at the same time.
    SURFACE ROUGHNESS
    Rmax
    Sliding Surface  Ød
    ≤4 μm
    Groove Base ØD2
    ≤10 μm
    Groove FlanksS1
    ≤15 μm
    INSTALLATION
    K30 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
    NOTES
    For special applications that require high temperatures , K30 can be produced in FKM material.