-40%

Oxygen O2 Sensor Upstream&Downstream For Toyota Tacoma 3.4L 4WD Manual 1995-2000

$ 29.39

Availability: 219 in stock
  • Item must be returned within: 30 Days
  • Item name: Oxygen Sensor
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Fitment Type: Direct Replacement
  • Manufacturer Part Number: 33049389860U8Q4X
  • Condition: New
  • Brand: Kwiksen
  • Interchange Part Number 2: 13095, ES20072
  • Fits Vehicle: 1995-2000 Toyota Tacoma 3.4L 4WD Manual
  • Returns Accepted: Returns Accepted
  • Placement on Vehicle: Front
  • Location: Upstream&Downstream
  • Warranty: 1 Year
  • Interchange Part Number 1: SG1839, 13104, ES20072, SG1838
  • Cross Reference Part Number: Does not apply

    Description

    Oxygen O2 Sensor Upstream&Downstream For Toyota Tacoma 3.4L 4WD Manual 1995-2000
    Please check fitment notes & description for accurate information.
    Specification:
    *Kwiksen Brand New Oxygen Sensor
    *Direct Plug-In Replacement.
    *Warranty: 1 Year
    *Position:Upstream&Downstream
    *4 wire configuration
    Fit Vehicles:
    1995 Toyota Tacoma DLX - 3.4L 4WD; Manual Trans
    1995 Toyota Tacoma SR5 - 3.4L 4WD; Manual Trans
    1996 Toyota Tacoma DLX - 3.4L 4WD; Manual Trans
    1996 Toyota Tacoma SR5 - 3.4L 4WD; Manual Trans
    1997 Toyota Tacoma DLX - 3.4L 4WD; Manual Trans
    1997 Toyota Tacoma SR5 - 3.4L 4WD; Manual Trans
    1998 Toyota Tacoma DLX - 3.4L 4WD; Manual Trans
    1998 Toyota Tacoma Limited - 3.4L 4WD; Manual Trans
    1998 Toyota Tacoma Pre Runner - 3.4L 4WD; Manual Trans
    1998 Toyota Tacoma SR5 - 3.4L 4WD; Manual Trans
    1999 Toyota Tacoma DLX - 3.4L 4WD; Manual Trans
    1999 Toyota Tacoma Limited - 3.4L 4WD; Manual Trans
    1999 Toyota Tacoma Pre Runner - 3.4L 4WD; Manual Trans
    1999 Toyota Tacoma SR5 - 3.4L 4WD; Manual Trans
    2000 Toyota Tacoma DLX - 3.4L Exc. Calif.; 4WD; Manual Trans
    2000 Toyota Tacoma Limited - 3.4L Exc. Calif.; 4WD; Manual Trans
    2000 Toyota Tacoma Pre Runner - 3.4L Exc. Calif.; 4WD; Manual Trans
    2000 Toyota Tacoma SR5 - 3.4L Exc. Calif.; 4WD; Manual Trans
    1996 Toyota 4Runner Limited - 3.4L Manual Trans; 4WD
    1996 Toyota 4Runner SR5 - 3.4L Manual Trans; 4WD
    1997 Toyota 4Runner Limited - 3.4L Manual Trans; 4WD
    1997 Toyota 4Runner SR5 - 3.4L Manual Trans; 4WD
    1998 Toyota 4Runner Limited - 3.4L Manual Trans; 4WD
    1998 Toyota 4Runner SR5 - 3.4L Manual Trans; 4WD
    1999 Toyota 4Runner Limited - 3.4L 4WD; Exc. Calif.; Manual Trans
    1999 Toyota 4Runner SR5 - 3.4L 4WD; Exc. Calif.; Manual Trans
    2000 Toyota 4Runner Limited - 3.4L 4WD; Exc. Calif.; Manual Trans
    2000 Toyota 4Runner SR5 - 3.4L 4WD; Exc. Calif.; Manual Trans
    Package Include:
    2 x Oxygen Sensor
    127454x1---Upstream
    127446x1---Downstream
    Must Know Before Buying:
    The following information is for instructional and guidance reference only. We try and make them as accurate as we can.
    If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.
    Items that have been installed, altered or contaminated are non-returnable. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
    20
    % restocking fee is required
    if buyer bought wrong items due to not paying attention to fitment information and ask for return.
    The Price, Quality & Funcitonality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
    Q: How do I know the O2 sensor is good or not?
    (
    Online Video
    )
    A:
    The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
    Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method,
    DO NOT
    pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
    Please take a
    video clip
    of the voltmeter and contact us if our sensor:
    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.
    Note before ordering:
    Please check actual stock part size before purchasing replacements. Compatibility list on eBay listing is not a complete list and it is a known issue that there are errors on it;
    If possible please try to use laptop to check the compatibility chart, the detail information will be showed in compatibility chart due to mobile phone or tablet PC can not show the detail note about vehicles.
    If you encounter model/functional compatibility issue, please contact us for assistance. We will help you exchange to compatible item (if available).
    Policy
    Shipping
    Orders before 1pm will be shipped out the same day, the remains will be processed within 24 hours.
    By requersting to change address, customer has to cover all the costs.
    Delivery times may vary, particularly during the holiday season.Oftentimes, it costs 1 to 5 business days to get delivered.
    Return Policy
    We accept return in 30 days and appreciate communication in advance!
    You must contact us to request a Return Authorization Number (RA#) before you send anything back. Any packages returned by buyer Without communication will not be handled. With RA#, we may address return issues with high efficiency. Without RA#, we may fail to find your transaction. Appreciate your understanding!
    All returned items should be in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
    Replacements or refund should be concluded before return.
    Warranty
    There is 1 year warranty, if you have any issue with the item, please contact us to address it.