DSLRKIT 96watt ALL Gigabit 5 Ports 4 PoE+ Switch 802.3at af Power Over Ethernet

Description

DSLRKIT PSE4P1UGK
Gigabit
PoE+ Switch
5 Ports (1Uplink, 4 PoE) Power Over Ethernet Switch
IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)
Auto Detection Powered Device
AC Input: 100V ~ 240V
52VDC up to Max. 30W/port, 4ports Total budget 96Watt
10/100/1000Mbps ,Wall Mount
It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 4 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.
Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
Features:
Supports Virtual LAN(VLAN) ON/OFF
(
When the VLAN mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety.)
Up to 30w/port of Power on
Complies to IEEE 802.3af/802.3at PoE standard
Compatible with All IEEE 802.3af/802.3at
Safe: Low power Devices Receive Only the Power They Need
Safe and Reliable Power to WLAN Access Points
Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
Supports 10/100/1000 Base-T
Compact Design Fits Easily in WLAN Access
Plug-and-Play no configuration required
Each port supports auto MDI/MDIX
Specification:
ALL LAN/WAN Port:
Standard 1000Mbps Ethernet port. can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5e/6 cable
。
LAN Port 1-4:
any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs)
Virtual LAN
:
ON/OFF
LED
Power (Red)
PoE In-Use  and
1
000 LNK /
AC
T
(Orange LAN Port)
10/100 LNK / ACT(Green)
Product Dimensions
132mm
W x 66
mm D x 32mm
H
Weight
660g(switch and Power adapter)
Power Requirement
100~240V AC, 50-60 Hz
Power Consumption
96 Watts maximum
PoE Standard
IEEE 802.3af, IEEE802.3at
PoE Power Output
52VDC, Max. 30Watt/port, 4ports Total budget 85Watt
PoE Power Supply Type
pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan
PoE Power Budget
PoE: Max. 85W
Regulation Compliance
FCC Part 15 Class A, CE
Operating
Temperature: 0~50 Degree C, Relative Humidity: 20~95%
Storage
Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing)
Standards Compliance
IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-Tx
IEEE 802.3z: 1000Base-Tx
IEEE 802.3x: Flow Control
Item Included:
DSLRKIT PSE4P1UGK PoE switch x1(with Retail Box)
AC Power Adapter(DC OutPut: 52V/1.85
A) x1
AC Power Cable x1
AC power plug is US, EU or AU type,if you need other type (UK),Please leave a message.
12 Months Warranty from the data of purchase.