-40%
Dell Force10 Z9000-AC-R 32-Port 40GbE Core Router Network Fabric Switch Dual PSU
$ 131.99
- Description
- Size Guide
Description
TESTING & COSMETIC NOTES:This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING AS DESCRIBED
This unit has been factory reset, view console log for more info. Only what is photoed is included. Hard drive NOT included.
COMPONENTS INCLUDED IN THIS AUCTION:
• (1) - DELL FORCE10 Z9000-AC-R 32-PORT 40GBE CORE ROUTER NETWORK FABRIC QSFP+ PSM4 SR ESR SWITCH 2U 752-00572-01 REV H 0GJKPG GJKPG
• (2) - EMACS 1000W POWER SUPPLY PSS-2A00V Z9000-PWR-AC-R 752-00552-02 REV. D 00XRVV 0XRVV
• (1) - PAIR OF RACKMOUNT EARS
• (2) - POWER CORD
REPLACEMENT GUARANTEE - ITEM IS GUARANTEED WORKING AS DESCRIBED:
Please see our test notes above for further information. Our descriptions, and photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive an item with the level of operation shown in the photos and described in our Test and Cosmetic notes. When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. We do not refund the shipping charges because we are unable to recoup these costs.
ADDITIONAL INFORMATION:
The following is the Console Log from this item:
Grub 1.99~rc1 (Force10 Networks)
Built by root at bsdlab on Thu_Aug_18_06:51:21_UTC_2011
Z9000 Boot selector Label 3.0.1.1 NetBoot Label 0.0.0.0
Press Esc to stop autoboot ... 0
Booting 'Force10 Boot'
Grub 1.99~rc1 (Force10 Networks)
Built by root at bsdlab on Thu_Aug_18_06:51:21_UTC_2011
Z9000 Boot selector Label 3.0.1.1 NetBoot Label 0.0.0.0
Booting Primary Image from Flash A
kernel text is mapped with 3 large pages and 233 normal pages
WARNING: skipping large memory map entry: 0x100000000/0x130000000/0x1
Loaded initial symtab at 0xc29ca000, strtab at 0xc2a772ec, # entries 44268
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Force10 Release 8.3.11.3 #labelName
NetBSD 5.1_STABLE (S3240) #0: Tue Dec 20 00:12:17 PST 2011
build@ecluster-sjc-05:/work/build/buildSpaces/build13/E8-3-11/SW-NetBSD5
/usr/src/sys/arch/i386/compile/S3240
total memory = 3313 MB
avail memory = 3214 MB
sysctl_createv: sysctl_create(ipcstats) returned 17
sysctl_createv: sysctl_create(bcaststats) returned 17
sysctl_createv: sysctl_create(command) returned 17
sysctl_createv: sysctl_create(ip0) returned 17
sysctl_createv: sysctl_create(ip1) returned 17
sysctl_createv: sysctl_create(ip2) returned 17
Force10 Networks Z9000 32-port TE/FG (ZB) (3.0.0.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1733MHz, id 0x106e4
ioapic0 at mainbus0 apid 0
ioapic1 at mainbus0 apid 2
acpi0 at mainbus0: Intel ACPICA 20080321
PS2K (PNP0303) at acpi0 not configured
PS2M (PNP0F03) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
TMR (PNP0100) at acpi0 not configured
SPKR (PNP0800) at acpi0 not configured
COPR (PNP0C04) at acpi0 not configured
HPET (PNP0103) at acpi0 not configured
PWRB (PNP0C0C) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0
pchb0: vendor 0x8086 product 0x3707 (rev. 0x10)
ppb0 at pci0: vendor 0x8086 product 0x3721 (rev. 0x10)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
ppb1 at pci0: vendor 0x8086 product 0x3722 (rev. 0x10)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
FPGA: XILINX (0x10ee) found
kraken0 at pci2Kraken Fpga Revision [0x300]
ppb2 at pci0: vendor 0x8086 product 0x3723 (rev. 0x10)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
wm0 at pci0: PCH LAN (82578DM) Controller, rev. 5
wm0: interrupting at ioapic0 pin 20
wm0: Ethernet address 00:01:e8:ac:74:6b
atphy0 at wm0 phy 2: Atheros AR8021 10/100/1000 PHY, rev. 2
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ehci0 at pci0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
usb0 at ehci0: USB revision 2.0
ppb3 at pci0: vendor 0x8086 product 0x3b42 (rev. 0x05)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 4
snbsd_kbde0 at pci4ppb4 at pci0: vendor 0x8086 product 0x3b44 (rev. 0x05)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 5
snbsd_kbde1 at pci5ppb5 at pci0: vendor 0x8086 product 0x3b46 (rev. 0x05)
ppb5: unsupported PCI Express version
pci6 at ppb5 bus 6
nbsd_kbde0 at pci6nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x6
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xb
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47174 and revision 2
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FBA00004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfba00004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:D8683000 TAG:0x1 ADDR:FBA00000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xd8683000)
INT REG:0000010b
enter :kbde_dmamem_alloc
BCM Bus Space mem Handle = 0xc0f63240
_dma_pbase = 0x8000000
kva=0xd86c3000/0x2000000,map=0xc6699640,nsegs=1,pa=8000000/2000000
DMA VBASE:0xd86c3000 DMA PBASE:8000000
ppb6 at pci0: vendor 0x8086 product 0x3b48 (rev. 0x05)
ppb6: unsupported PCI Express version
pci7 at ppb6 bus 7
nbsd_kbde1 at pci7nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x7
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xa
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47174 and revision 2
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FB900004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfb900004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:DA6C8000 TAG:0x1 ADDR:FB900000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xda6c8000)
INT REG:0000010a
ppb7 at pci0: vendor 0x8086 product 0x3b4a (rev. 0x05)
ppb7: unsupported PCI Express version
pci8 at ppb7 bus 8
nbsd_kbde2 at pci8nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x8
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xb
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47174 and revision 2
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FB800004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfb800004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:DA70D000 TAG:0x1 ADDR:FB800000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xda70d000)
INT REG:0000010b
ppb8 at pci0: vendor 0x8086 product 0x3b4c (rev. 0x05)
ppb8: unsupported PCI Express version
pci9 at ppb8 bus 9
nbsd_kbde3 at pci9nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x9
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xa
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47174 and revision 2
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FB700004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfb700004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:DA752000 TAG:0x1 ADDR:FB700000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xda752000)
INT REG:0000010a
nbsd_deferred_attach invoked
nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x4
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xb
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47174 and revision 2
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FBC00004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfbc00004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:DA792000 TAG:0x1 ADDR:FBC00000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xda792000)
INT REG:0000010b
nbsd_kbde_attach invoked 0
pa->pa_flags=0x16
pa->pa_bus=0x5
pa->pa_device=0x0
pa->pa_function=0x0
pa->pa_intrswiz=0x0
pa->pa_intrline=0xa
pa->pa_intrpin=0x1
pa->pa_rawintrpin=0x1
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47174 and revision 2
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :FBB00004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0xfbb00004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:DA7D2000 TAG:0x1 ADDR:FBB00000 SIZE:40000
MEM TAG OF BSC 0x1 VADDR PTR: (0xda7d2000)
INT REG:0000010a
ehci1 at pci0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
usb1 at ehci1: USB revision 2.0
ppb9 at pci0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci10 at ppb9 bus 10
ibexlpc0 at pci0
ibexlpc0: vendor 0x8086 product 0x3b14 (rev. 0x05)
ibexlpc: SIO SPI flash mapped to port 0x338-0x339
gpiobus at ibexlpc0 not configured
ahcisata0 at pci0: vendor 0x8086 product 0x3b22
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xf720e040
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ichsmb0 at pci0: vendor 0x8086 product 0x3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
pcamux0 at iic0 addr 0x70: PCA 9547 8-Channel (CPU)
pcamux1 at iic0 addr 0x71: PCA 9547 8-Channel (Spine)
pcamux2 at iic0 addr 0x72: PCA 9548 8-Channel (Fan)
pcamux3 at iic0 addr 0x72: PCA 9548 8-Channel (Qsfpx0:7)
pcamux4 at iic0 addr 0x72: PCA 9548 8-Channel (Qsfpx8:15)
pcamux5 at iic0 addr 0x72: PCA 9548 8-Channel (Qsfpx16:23)
pcamux6 at iic0 addr 0x72: PCA 9548 8-Channel (Qsfpx24:31)
pcagpio0 at iic0 addr 0x20: PCA9506 GPIO Ext Qsfp0:7/Fan/Fpga
pcagpio1 at iic0 addr 0x21: PCA9506 GPIO Ext Qsfp8:15/Fan
pcagpio2 at iic0 addr 0x20: PCA9506 GPIO Ext Qsfp16:23
pcagpio3 at iic0 addr 0x21: PCA9506 GPIO Ext Qsfp24:31
pcagpio4 at iic0 addr 0x20: PCA9506 GPIO Ext 7SegDisp
ad741x0 at iic0 addr 0x48: AD7417ARTZ - Leaf A Sensor 0
ad741x1 at iic0 addr 0x49: AD7417ARTZ - Leaf A Sensor 1
ad741x2 at iic0 addr 0x4a: AD7417ARTZ - Leaf A Sensor 2
ad741x3 at iic0 addr 0x48: AD7417ARTZ - Leaf B Sensor 0
ad741x4 at iic0 addr 0x49: AD7417ARTZ - Leaf B Sensor 1
ad741x5 at iic0 addr 0x4a: AD7417ARTZ - Leaf B Sensor 2
ad741x6 at iic0 addr 0x48: AD7417ARTZ - Spine A Sensor 0
ad741x7 at iic0 addr 0x49: AD7417ARTZ - Spine A Sensor 1
ad741x8 at iic0 addr 0x4a: AD7417ARTZ - Spine A Sensor 2
ad741x9 at iic0 addr 0x48: AD7417ARTZ - Spine B Sensor 0
ad741x10 at iic0 addr 0x49: AD7417ARTZ - Spine B Sensor 1
ad741x11 at iic0 addr 0x4a: AD7417ARTZ - Spine B Sensor 2
i2ctool0 at iic0i2c Tool
lm9524x0 at iic0 addr 0x2b: LM9524 FPGA Temp 0
s2eeprom0 at iic0 addr 0x50: AT24Cxx EEPROM - Base Eeprom (MB) 0
s2eeprom1 at iic0 addr 0x51: AT24Cxx EEPROM - Base Eeprom (MB) 1
s2eeprom2 at iic0 addr 0x50: AT24Cxx EEPROM - Base Eeprom (MB) 2
s2eeprom3 at iic0 addr 0x51: AT24Cxx EEPROM - Base Eeprom (MB) 3
s2eeprom4 at iic0 addr 0x56: AT24Cxx EEPROM - Fantray Eeprom (MB) 0
s2eeprom5 at iic0 addr 0x56: AT24Cxx EEPROM - Fantray Eeprom (MB) 1
s2eeprom6 at iic0 addr 0x56: AT24Cxx EEPROM - Fantray Eeprom (MB) 2
s2eeprom7 at iic0 addr 0x56: AT24Cxx EEPROM - Fantray Eeprom (MB) 3
zippypsu0 at iic0 addr 0x58: Zippy PSU 0 (Top)
zippypsu1 at iic0 addr 0x58: Zippy PSU 1 (Bottom)
emc2303x0 at iic0 addr 0x2c: EMC2303 RPM based fan controller 0
emc2303x1 at iic0 addr 0x2c: EMC2303 RPM based fan controller 1
emc2303x2 at iic0 addr 0x2c: EMC2303 RPM based fan controller 2
emc2303x3 at iic0 addr 0x2c: EMC2303 RPM based fan controller 3
ina219x0 at iic0 addr 0x40: TI INA219 Current Monitor 0 (Top)
ina219x1 at iic0 addr 0x40: TI INA219 Current Monitor 1 (Bottom)
qsfpx0 at iic0 addr 0x50: QSFP eeprom at addr 0x50
qsfpx1 at iic0 addr 0x51: QSFP eeprom at addr 0x51
ad524x0 at iic0 addr 0x2c: AD524x - Leaf A Voltage POT 0
ad524x1 at iic0 addr 0x2c: AD524x - Leaf B Voltge POT 1
ad524x2 at iic0 addr 0x2c: AD524x - Leaf C Voltage POT 2
ad524x3 at iic0 addr 0x2c: AD524x - Leaf D Voltge POT 3
ad524x4 at iic0 addr 0x2c: AD524x - Spine A Voltage POT 4
ad524x5 at iic0 addr 0x2c: AD524x - Spine B Voltage POT 5
adm1032x0 at iic0 addr 0x4c: ADM1032 - Leaf A ThermTrip
adm1032x1 at iic0 addr 0x4c: ADM1032 - Leaf B ThermTrip
adm1032x2 at iic0 addr 0x4c: ADM1032 - Leaf C ThermTrip
adm1032x3 at iic0 addr 0x4c: ADM1032 - Leaf D ThermTrip
dimm0 at iic0 addr 0x54: Dimm0
dimm1 at iic0 addr 0x55: Dimm1
isa at ibexlpc0 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
rtclock0 at isa0 port 0x70-0x71
wbsio0 at isa0 port 0x2e-0x2f: Winbond LPC Super I/O W83667HG_B rev 0x53
w83667hgb0 at wbsio0 port 0x290-0x291
wbspiflash0: SPI flash W23Q128BV found.
wbspiflash0 at isa0 port iomem irq drq attimer0: attached to pcppi0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0: <8GB SATA Flash Drive>
wd0: 7547 MB, 15334 cyl, 16 head, 63 sec, 512 bytes/sect x 15456672 sectors
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, a
ddr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, a
ddr 2
uhub3: single transaction translator
Too many symbols for tree, skipping 11501 symbols
bcnp pseduo-device
bcmw pseduo-device
bcmwstk pseduo-device
bcmws pseduo-device
bshell pseudo-device
s3240diag as pseudo-device getting attached
f10logger as pseudo-device getting attached
crshntfy pseudo-device
CORETEMP device attached
solidsd pseudo-device
boot device: md0
root on md0a ("wd1") - device not found no dump device found
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
route: writing to routing socket: File exists
add host 127.10.10.10: gateway 127.10.10.10: File exists
route: writing to routing socket: File exists
add host 127.10.10.10: gateway 127.10.10.10: File exists
add host 10.11.200.200: gateway 127.0.0.1
add net 10.11.200.200: gateway 255.255.0.0
add net 0.0.0.0: gateway 10.11.200.254
RELEASE IMAGE HEADER DATA :
--------------------------
Release Image SW Image Count : 3
Release Image Major Version : 8
Release Image Minor Version : 3
Release Image Maint Version : 11
Release Image Patch Version : 3
Release Image Header Size : 140
Release Image Data Size : 29682918
Release Image Platform Type : 10
Release Image Product Name : FTOS-ZB
Release Image Checksum Value : 0xb9d160ed
Release Image Header Checksum: 0x63732601
Release Image Create Year : 2011
Release Image Create Month : 12
Release Image Create Date : 20
Release Image Create Hour : 0
Release Image Create Minute : 43
Release Image Create Second : 10
SOFTWARE IMAGE HEADER DATA :
----------------------------
Software Image[1] Major Version : 8
Software Image[1] Minor Version : 3
Software Image[1] Maint Version : 11
Software Image[1] Patch Version : 3
Software Image[1] Image type : 2
Software Image[1] Header Size : 100
Software Image[1] Img Data Size : 9636118
Software Image[1] Img Orig Size : 9636118
Software Image[1] Family Code : cp
Software Image[1] Img file Name : CPRPLP-RPM-AP-8.3.11.3.bin
Software Image[1] Hdr Checksum : 0x9152bc9e
Software Image[1] Data Checksum : 0xe7f06255
SOFTWARE IMAGE HEADER DATA :
----------------------------
Software Image[2] Major Version : 8
Software Image[2] Minor Version : 3
Software Image[2] Maint Version : 11
Software Image[2] Patch Version : 3
Software Image[2] Image type : 2
Software Image[2] Header Size : 100
Software Image[2] Img Data Size : 10829774
Software Image[2] Img Orig Size : 28651520
Software Image[2] Family Code : nbsdpcprplp
Software Image[2] Img file Name : NBSDPCPRPLP-RPM-AP-8.3.11.3.bin
Software Image[2] Hdr Checksum : 0xf6a638c7
Software Image[2] Data Checksum : 0xcbc496a9
SOFTWARE IMAGE HEADER DATA :
----------------------------
Software Image[3] Major Version : 8
Software Image[3] Minor Version : 3
Software Image[3] Maint Version : 11
Software Image[3] Patch Version : 3
Software Image[3] Image type : 2
Software Image[3] Header Size : 100
Software Image[3] Img Data Size : 9216726
Software Image[3] Img Orig Size : 37283840
Software Image[3] Family Code : nbsdlibcp
Software Image[3] Img file Name : NBSDLIBCP-RPM-AP-8.3.11.3.bin
Software Image[3] Hdr Checksum : 0xc7e53f06
Software Image[3] Data Checksum : 0xd81ac42a
delete host 10.11.200.200: gateway 127.0.0.1
delete net 10.11.200.200: gateway 255.255.0.0
delete net 0.0.0.0: gateway 10.11.200.254
Starting Dell Force10 application
00:01:01: %STKUNIT0-M:CP %RAM-6-ELECTION_ROLE: Stack unit 0 is transitioning to
Management unit.
00:01:02: %STKUNIT0-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 0 present
00:01:11: %STKUNIT0-M:CP %CHMGR-5-CHECKIN: Checkin from Stack unit 0 (type Z9000
, 128 ports)
00:01:14: %STKUNIT0-M:CP %CHMGR-0-PS_UP: Power supply 0 in unit 0 is up
00:01:14: %STKUNIT0-M:CP %CHMGR-0-PS_UP: Power supply 1 in unit 0 is up
00:01:15: %STKUNIT0-M:CP %CHMGR-5-STACKUNITUP: Stack unit 0 is up
00:01:16: %STKUNIT0-M:CP %CHMGR-5-SYSTEM_READY: System ready
00:01:17: %STKUNIT0-M:CP %RAM-5-STACK_STATE: Stack unit 0 is in Active State.
00:01:17: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
Jul 12 23:54:46 UTC: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin
state to down: Ma 0/0
Jul 12 15:54:46 PST: %STKUNIT0-M:CP %CLOCK-6-TIME CHANGE: Timezone configuration
changed from "UTC 0 hrs 0 mins" to "PST -8 hrs 0 mins"
Force10>Jul 12 15:54:46 PST: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successf
ul for user on line console
Force10>Jul 12 15:54:49 PST: %STKUNIT0-M:CP %CHMGR-1-PSU_FAN_STATUS: Fan 0 in PS
U 0 of Unit 0 is up
Jul 12 15:54:49 PST: %STKUNIT0-M:CP %CHMGR-1-PSU_FAN_STATUS: Fan 0 in PSU 1 of U
nit 0 is up
Force10>
Force10>en
Force10#Jul 12 15:55:06 PST: %STKUNIT0-M:CP %SEC-4-ENABLE_PASSW_NOT_CONFIGURED:
Enable password is required for authentication but not configured
Jul 12 15:55:06 PST: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
password authentication success on console
Force10#show ver
Dell Force10 Networks Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: 8.3.11.3
Copyright (c) 1999-2011 by Dell Inc.
Build Time: Tue Dec 20 00:20:23 2011
Build Path: /sites/sjc/work/build/buildSpaces/build13/E8-3-11/SW/SRC
Force10 uptime is 1 minute(s)
System image file is "system://A"
System Type: Z9000
Control Processor: Intel Jasper Forest with 3474911232 bytes of memory.
8G bytes of boot flash memory.
1 32-port TE/FG (ZB)
32 Forty GigabitEthernet/IEEE 802.3 interface(s)
Force10#
Force10#show system
Stack MAC : 00:01:e8:ac:74:69
Reload Type : normal-reload
-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : Z9000 - 32-port TE/FG (ZB)
Current Type : Z9000 - 32-port TE/FG (ZB)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 128
Up Time : 55 sec
FTOS Version : 8.3.11.3
Jumbo Capable : yes
POE Capable : no
Burned In MAC : 00:01:e8:ac:74:69
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type Temperature(deg C) FanSpeed(rpm)
---------------------------------------------------------------------------
0 0 up AC 35 22388
0 1 up AC 34 21428
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
--------------------------------------------------------------------------------
0 0 up up 2700 up 2700
0 1 up up 2700 up 2700
0 2 up up 2700 up 2700
0 3 up up 2700 up 2700
Speed in RPM
-- Unit 1 --
Unit Type : Member Unit
Status : not present
-- Unit 2 --
Unit Type : Member Unit
Status : not present
-- Unit 3 --
Unit Type : Member Unit
Status : not present
-- Unit 4 --
Unit Type : Member Unit
Status : not present
-- Unit 5 --
Unit Type : Member Unit
Status : not present
-- Unit 6 --
Unit Type : Member Unit
Status : not present
-- Unit 7 --
Unit Type : Member Unit
Status : not present
Force10#
Please Click Here to Visit Our Store
SearchBy12 -
231071
| Loc: E52 | L: Jack | T:
| PM: Nick
| QTY: 0 | Plan: 50/50 NET of FEES | 26.00"x21.00"x7.00" 65.00lbs | Start: 9.99 | BIN: {{detail_product_description}}.00 | | 7/14/2021 |
|
51268