Bed Bug Heat System with Air Mover for Killing Bed Bugs

Description

This is a great system for killing bed bugs with heat.  The heater has a built in air mover, thermostat controller preset and designed for Bed Bug heat eradication.  We are including one additional air mover, four heavy duty high heat compatible  extension cords with lighted ends so you will be ready to open it up and start treating right away.  Check our listings as we also have larger systems as well as smaller depending on the size area you are treating.  This system is designed to be optamized for residential or commerical properties where there is primarily 15 amp 110v circuits available for use.  If you however have 20 amp circuits available, you would want to get the KillerHeat RH-8 system instead as that system will give you a bit more heat and treats up to a 400 sf area.  You don't have to use all of the heating elements when using these systems but the more heat you can get, the quicker and more efficient the treatment will be.
We have been providing heat systems to the restoration and pest control industry since 2005.  Our tech support is no charge to our customers.  We are here for you to help answer questions and get you going.  This is not Rocket Science however it is science none the less and having an experienced technical support representative available to help you even if just to confirm your setup is correct is worth a lot.  Again, there is never a charge for phone, text, email, video conferenceing, etc.   80% of our customers come from direct referrals and we have built our business around the idea that the better we treat our existing customers, the better we deserve new ones.  It's worked like this since 2005.  You will be given the direct cell phone number to your tech as well as our company contact info as well of course upon purchasing through Ebay.
Check our other listings as well for high heat compatible air movers and other heat systems.  Many of our customers start out with a system like this and as they grow their business or have additional needs for more capacity, add on to it with additional air movers, heat boosters and the like.  This bed bug heat system is the center of most of our larger systems at KillerHeat as it is so flexable in how one can hook it up.  This system comes setup for 110 power.  We also have options for 220v power depending on your need.  Send us a message with questions and one of our techs will message back.  We want our customers to have the right system for their needs.
Shipping quoted is to the lower 48 states.  If you reside outside of these, please message us and we can calculate the difference.  We don't mark up shipping but would most likely need to have a slight up-charge to cover any additional expense.
Specs for the KillerHeat RH4 by K&J
19,642 BTU's
8 Heating Elements designed to be supplied by 4 plugs each to a 12 amp circuit
5760 Watts
Total Amps 48 (split between the four plugs)
On board preset thermostat which can be manually adjusted if desired
1500 CFM
42 lbs
One Year warranty on parts and labor
Treatment area approximately 350sf
Technical assistance via Phone, Email, text, Video
This package comes with:
One High Temp Compatible Axial Air Mover (AF Elite) with built in GFCI, hour meter and variable speed dial
One 12 gauge 5 foot heavy duty high heat compatible extension cord with lighted end
One
12 gauge
25 foot heavy duty high heat
compatible
extension cord with lighted end
two
12 gauge
50 foot heavy duty high heat
compatible
extension cord with lighted end
One IR Thermometer Gun